2 updates in a row!  Tonight I spent a couple of hours removing all the hardware from both doors.  The only things left are the mirror and door catch on the driver's side, and the door top seal on both sides.  I'll have to drill the rivets out of the seals and install new ones.  Other than that, I think that all that's left to remove before we're ready for the rotisserie are the windshield, wiper motors and arms, from turn indicators, and some hardware, like the snaps for the convertible top.

Here's the back of the inside of the passenger's door, showing the mount points or the door latch mechanism, as well as the top mount for the rear window track.

This shows the lower mount point for the rear window track and the center support, as well as the center mount bolts for the window regulator.

Here's the front mount points for the window regulator and the mounts for the remote door latch.

Here's the lower mount for the front window track, which is also the rear of the vent window frame.

Here's how the lever for the remote door latch handle is fastened together.

Here's the inside of the door where the key lock is fastened.

The door lock detached from the door.

This one is for Mike D.  This is one of the snaps that hold the side trim to the door.

Each piece of trim also has one of these rectangular guides at one end.  The on on the door has one of these in the middle.