I spent all weekend getting the body ready for the rotisserie.  I don't know when we'll get it put on the rotisserie, but it'll be ready.  I removed everything from the interior, including the window mechanisms, carpeting and wiring harness.  I also drilled out the rivets for the side trim pieces and removed the headlight and parking light assemblies.  Then today I disassembled and cleaned one of the wing windows, and also cleaned up and polished the trim rings for the headlights.

This shows one of the mounting points for a clamp on the wiring harness under the dash.

Here's the turn signal flasher unit, mounted on the right side under the dash on one of the wiper motor mounting ears.

This shows the wiring to the flasher unit.

Here's the routing for the wiring harness in the engine compartment.

Another view of the routing of the wiring harness.